Disconnecting The Cables; Installing Diagnostics - 3Com PC Card User Manual

6 C 1: I
HAPTER NSTALLING AND
Disconnecting the
Cables

Installing Diagnostics

C C
ONNECTING THE ARD
The LAN and modem cables are designed to lock in place when you connect them
to the card. To release the cable from the card, squeeze the release clips located on
the sides of the connector .
CAUTION : Do not pull or attempt to disconnect the cable without squeezing
the release clips. Otherwise, you may damage the card and make it inoperable.
Figure 6 Disconnecting Cables from the Card
If you did not install the diagnostics utilities when you installed this manual, you
should do so now. In addition to installing the manual, the Setup program installs
LAN Diagnostics, Modem Diagnostics, and a PDF version of this guide.
1 Insert User Guide and Diagnostics Installation Disk 1 in the floppy drive and click
Start .
2 Click Run and type a:\setup [Enter] to begin installation. Choose which options to
install and follow the instructions as they appear.
A PDF version of the User Guide is also provided. The file is called For Print -
LAN+Modem Card User Guide.PDF and is suitable for viewing or printing with the
Acrobat Reader. If you do not have a copy of the Acrobat Reader, you can obtain
the program at no cost from the Adobe World Wide Web site at www.adobe.com.
For information on running diagnostics, see "Diagnostics" on page 55.