Connecting The Card; Lan Connector Leds - 3Com PC Card User Manual

4 C 1: I
HAPTER NSTALLING AND

LAN Connector LEDs

C C
ONNECTING THE ARD
The LEDs on the network connector display the status of your network link.
Figure 4 LEDS
Table 1 LAN Connector LEDs
LED Description
10 LNK Link integrity
100 LNK Link integrity
You can use the LEDs to verify link integrity, but the LAN+Modem card must be
connected to the network and the network drivers must be installed. For
information on installing drivers, see:
"Windows 95" on page 7
"Windows 98" on page 15
"Windows NT" on page 21
Steady
Good 10BASE-T
connection between PC
Card and hub
Good 100BASE-TX
connection between PC
Card and hub
Off
No connection between card
and hub. (Off when 100 LNK
LED is on.)
No connection between card
and hub. (Off when 10 LNK
LED is on.)