Canon 2711B019AB Basic Operation Manual page 83

Collating Copies
3
Press
C O L L A T E / 2
– If you want to use <COLLATE> and "2 on 1
Combination" (see p. 4-15) at the same time,
select <COLLATE+2 ON 1>, then press [OK].
– If you want to use <COLLATE> and the 2-
sided copying at the same time, go to step 3
of "1 to 2-Sided Copying" (see p. 4-19), "2 to 2-
Sided Copying (MF4380dn Only)" (see p. 4-20),
or "2 to 1-Sided Copying (MF4380dn Only)"
(see p. 4-21).
4
Use –
desired copy quantity (1 to 99).
1 0 0 %
5
Press [Start].
– If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page. When scanning
is complete, press [OK].
– The machine prints the remaining sets of
copies.
– To cancel all settings, press
– When you switch the mode by pressing the
mode keys such as
be canceled. If you want to keep the settings,
set the collate mode as follows:
[Menu] → <COPY SETTINGS> → <STANDARD
SETTINGS> → <AUTO COLLATE> → <ON> (See
"COPY SETTINGS, " on p. 12-5.)"
– When scanning multiple page documents,
<MEMORY FULL> may appear in the display
and scanning may be canceled. If this happens,
press [Stop/Reset] to return to the standby
mode.
4-14
[Collate/2 on 1].
O N 1
C O L L A T E
[numeric keys] to enter the
* A 4
T E X T / P H O T O
[Stop/Reset].
[FAX], all settings will
1