Canon 2711B019AB Basic Operation Manual page 116

1
Place documents.
2
Press [Menu].
3
Press [ ] or [
<BROADCAST>, then press [OK].
M E N U
3 B R O A D C A S T
4
Specify the destination.
N O . 0 0 1 =
Use – , [numeric keys] and
one-touch keys, coded dial codes, or
[Address Book] to specify destinations.
– You can enter up to 16 different fax numbers
using – ,
– Make sure to press [OK] after entering the
recipient's number if you use
keys].
] to select
[Tone],
[numeric keys] and [Tone].
– [numeric
5
Repeat step 4 to enter all required
recipients.
To check all the specified destinations, press [
or [ ] to scroll the display.
6
Press [Start].
When you place the documents on the platen
glass, press [ ] or [
size, then press
When scanning is complete, press [OK] to start
sending.
If <CONFIRM FAX NO.> in <ACCESS TO DEST.> in
<SYSTEM SETTINGS> is set to <ON> and you
specify a fax number using
keys] and [Tone], you need to enter the fax
number again for comfirmation, then press [OK].
Specifying Destinations
] to select the document
[Start] for each document.
– , [numeric
]
5-23