Replacing The Processor Heat-Sink Fan - Dell Alienware M17X R3 Service Manual

1
1 processor heat-sink fan cable
3 captive screws (3)

Replacing the Processor Heat-Sink Fan

1 Follow the instructions in "Before You Begin" on page 9.
2 Align the screw holes on the processor heat-sink fan with the screw holes
on the chassis.
3 Tighten the three captive screws that secure the processor heat-sink fan to
the chassis.
4 Connect the processor heat-sink fan cable to the connector on the system
board.
5 Replace the compartment door (see "Replacing the Compartment Door"
on page 16).
6 Replace the battery pack (see "Replacing the Battery Pack" on page 14).
38
Processor Heat-Sink Fan
2
3
2 processor heat-sink fan