Replacing The Wirelesshd Card - Dell Alienware M17X R3 Service Manual

1 wirelessHD card cable
3 screw

Replacing the WirelessHD Card

1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the new wirelessHD card from its packaging.
CAUTION:
excessive force, you may damage the connector.
CAUTION:
resistance, check the connectors on the card and on the system board, and realign
the card.
3 Insert the wirelessHD card connector at a 45-degree angle into the
connector on the system board.
4 Press the other end of the wirelessHD card down into the slot on the
system board and replace the screw that secures the wirelessHD card to the
system board.
5 Connect the wirelessHD card cable to the connector on the wirelessHD
card.
6 Replace the keyboard (see "Replacing the Keyboard" on page 57).
64
WirelessHD Card (Optional)
Use firm and even pressure to slide the card into place. If you use
The connectors are keyed to ensure correct insertion. If you feel
1
2 wirelessHD card
3
2