Removing The Memory Module(S); Prerequsites; Procedure - Alienware M17x R4 Owner's Manual

11
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
NOTE:
Your computer supports up to four memory module connectors. You can
access connectors DIMM 1 and DIMM 2 by removing the compartment door at the
bottom of your computer. You can access connectors DIMM 3 and DIMM 4 by
removing the memory-module cover on top of the palm rest assembly.

Prerequsites

1 Remove the battery pack. See "Removing the Battery Pack" on page 12.
2 Remove the compartment door. See "Removing the Compartment Door" on page 14.

Procedure

1 To remove memory module(s) from connectors DIMM 1 and DIMM 2, go to step 3.
2 To remove memory-module(s) from connectors DIMM 3 and DIMM 4:
a Remove the center control cover. See "Removing the Center Control Cover" on
page 41.
b Remove the keyboard. See "Removing the Keyboard" on page 45.
c Remove the screws that secure the memory-module cover to the
palm rest assembly.
1 memory-module cover
22
|

Removing the Memory Module(s)

Removing the Memory
Module(s)
Before working inside your computer, read the safety
1
2 screws (3)
2