Configure Web Login For Captive Portal Authentication - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Amigopod and ArubaOS Integration Application Note

Configure Web Login for Captive Portal Authentication

If you clicked Create Web Login in the previous step, a newly created web login page can be seen in
Customization > Web Logins. Figure 25 shows the automatically created web login, but a new one
can be created manually at a later stage.
Figure 25 Automatically generated web login page
The Page Name field defines the URL that is hosted on the Amigopod appliance. For example, in the
Aruba controller configuration chapter of this document, the Login Page entry of the captive portal
profile was defined as the following URL:
https://10.169.130.50/Aruba_login.php
The Page Name field allows the administrator to customize what web page name is published at the
root of the Amigopod web server. Figure 25 shows that the Aruba_login name is defined to match the
configuration of the captive portal profile on the Aruba controller.
You need not include the .php extension because it is appended automatically.
N O T E
The Address field should be set to the IP address of the Aruba controller. That is, this address needs
to be available from the guest client device via the captiveportal policy on the controller.
Aruba Networks, Inc. Amigopod Configuration | 33