Creating A Captive Portal Profile - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Amigopod and ArubaOS Integration

Creating a Captive Portal Profile

One of the key features of Amigopod is the ability to host the branded web login or captive portal
pages on the Amigopod appliance. With the captive portal profile, you can configure the login and
optional welcome pages to be hosted by Amigopod.
The captive portal authentication profile also defines several critical components of the working
solution such as the security role that will be used to control visitors that successfully authenticate with
Amigopod. Another component that is defined is that the Amigopod RADIUS server should be
referenced for this authentication traffic via the definition of the previous server group. The captive
portal profile definition is described in
Table 3 Captive Portal Profile Fields
Page Required?
Login Page Yes
Default Role Yes
Welcome Page Optional
Logout Popup No
Redirect Pause No
SwitchIP Optional
In this example, the login and welcome page URLs are configured. In a later step, these URLs will be
defined on the Amigopod as part of the web login configuration. The redirect pause will be shortened
to 3 seconds, and no logout window is needed. The default role will be set to
Based on the local deployment security policy, you must change the default
role of the captive portal profile to a role that includes appropriate firewall
policies.
N O T E
Aruba Networks, Inc.
Table 3.
Description
Location of the login page on the server
Post authentication role
Post authentication page
Small window to allow the user to log out
How long the user waits at the welcome page before continuing on to their original
destination
The local IP of the controller in a multiswitch environment
Application Note
.
auth-guest
ArubaOS Configuration | 18