Add Radius Server To A Server Group - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Amigopod and ArubaOS Integration
Modify RADIUS Client Settings
ip radius nas-ip 10.169.145.4
ip radius source-interface vlan 145

Add RADIUS Server to a Server Group

A server group must be created to define which authentication server will be referenced during the
authentication of visitor accounts. This server group is then referenced in the subsequent captive
profile configuration.
Make these configurations in the newly created server group definition:
Select the previously created Amigopod RADIUS server entry.

The remaining settings for server rules can be left as their defaults.

Aruba Networks, Inc.
Figure 5 Modify RADIUS client setting
Application Note
ArubaOS Configuration | 15