Understanding The Basics; Turning Your Tv On Or Off - Dynex DX-32L230A12 User Manual

Understanding the basics

3 Press or to highlight a language, then press ENTER. The
Choose Your Time Setting screen opens.
Choose Your Time Setting
Mode
Time Zone
DST
Year
Month
Day
Time
Move
If Automatic, options are automatically set by TV source.
4 Press or to highlight Mode, then press or to select
Manual (to set the date and time manually), or Auto (to set the
date and time automatically from a TV signal source, based on
the time zone you select).
5 Press or to highlight Time Zone, then press or to
select your time zone. Choices include Eastern, Central,
Mountain, Pacific, Alaska, Hawaii, Atlantic, or
Newfoundland.
6 Press or to highlight DST, then press or to select On (if
your viewing area observes Daylight Savings Time), or Off (if
your viewing area does not observe Daylight Savings Time).
7 If you selected Manual for Mode, set the date by pressing or
to highlight Year, Month, or Day, then press or to
change the setting.
8 If you selected Manual for Mode, set the time by pressing or
to highlight Time, then press or to highlight the hour,
minute, or AM/PM.
9 Press or to adjust the setting.
10 Press to highlight Next, then press or , or ENTER. The
Choose Your Picture Mode screen opens. If you want to return to
the Choose Your Menu Language screen, press MENU.
Choose Your Picture Mode
Move
Reduces total power consumption.
11 Press or to highlight Home Mode or Retail Mode, then
press ENTER.
Setup Wizard
Auto
Pacific
Off
2011
July
15
09 : 05 AM
Next
Select Back Exit
MENU EXIT
Setup Wizard
Home Mode
Retail Mode
Next
Select Back Exit
MENU EXIT
If you selected Home Mode, the Choose Your TV Source
screen opens.
Choose Your TV Source
Antenna
Cable
Cable/Satellite Box
Scan for channels
Move
Select Antenna if using an antenna for standard or HD TV.
-OR-
If you selected Retail Mode, a message appears "Are you
sure you want retail mode?" Select Yes to continue, or select
No to exit.
12 Press or to highlight Antenna, Cable, or Cable/ Satellite
Box (if your cable TV uses a box, select Cable/Satellite Box),
then press ENTER.
• If you chose Antenna or Cable, your TV automatically starts
scanning for channels available in your viewing area. If you
chose Cable/Satellite box, your TV does not need to scan
for channels.
• When you select Antenna, during the auto channel scan
your TV searches for digital channels first. When the digital
channel search is complete, a message appears asking if you
want to search for analog channels. You can ignore the
message to continue scanning, or press MENU or EXIT to
stop searching for channels.
Note:
The channel scan can take up to 20+ minutes. You can press EXIT
at any time to stop the auto scan, but you will need to run the auto
scan again to create a channel list.
13 To watch TV, press INPUT, press or to highlight the video
input source for your TV in the INPUT SOURCE list, then press
ENTER.
• If your TV is connected to an antenna, cable TV (no box), or
cable or satellite TV box using a coaxial cable, select TV.
• If your TV is connected to a cable or satellite box using an
HDMI cable or HDMI cable with a DVI adapter, select HDMI 1
or HDMI 2.
• If your TV is connected to a cable or satellite box using a
component video cable, select Component.
• If your TV is connected to a cable or satellite box using a
composite video cable, select AV.
Understanding the basics

Turning your TV on or off

To turn your TV on or off:
1 Make sure that the power cord is connected to a power outlet.
2 Press (Power) to turn on your TV. The power indicator LED
turns off.
3 Press (Power) again to turn off your TV. Your TV enters
Standby mode.
15
DX-32L230A12
Setup Wizard
RF CH : 0
0
Digital Channels
0
Analog Channels
Select Back Exit
MENU EXIT