Basic Procedures Of Adjustment Menu - Fujitsu P42XHA58E Series, P50XHA58E Series User Manual

BASIC PROCEDURES OF ADJUSTMENT MENU

• Shown below is the basic procedure used to change the options on the ADJUSTMENT MENU. (Ex.: Adjusting tint setting (Tint))
Selecting the adjustment mode for adjustment or setting. (The items to be adjusted or set are stored for each adjustment mode.)
1
2
3
4
5
6
7
Note
• On-screen information disappears if you do not take any action for about 60 seconds.
• Functions may not be available with some models and some device options.
• The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.
Press .
The main menu screen will appear.
Press or to select "PICTURE".
Each time you press or , one of the available
menus appears in the following sequence:
PICTURE POSITION/SIZE
FACTORY DEFAULT
The PICTURE Menu screen will appear.
Press or to select "Tint".
Press .
The "Tint" adjustment screen will appear.
Press or to change tint values.
: More greenish colors
: More purplish colors
Press to store.
Press when you finish.
* Repeat steps 3, 4, 5 and 6 when you wish to make
changes to other options.
* Select "Default" and press "
The PICTURE items are changed back to the default
settings available when the plasma display was
purchased.
* Press to halt the operation in progress.
AUDIO FEATURES
".
"PICTURE" selected in the main
menu screen
"Tint" selected in the PICTURE
Menu screen
"Tint" adjustment screen
E-15