Fujitsu P42XHA58E Series, P50XHA58E Series User Manual page 20

ADJUSTING THE PICTURE (Continued)
• [Targeting White]
Corrects red, green, and blue with respect to white.
[Red]: Use and
[Green]: Use
and
[Blue]: Use and
Press to store.
Making the Progressive Scan Settings
This sets the conversion processing of interlace signals to block receive signals.
• 24 Frame Mode
This function enables the optimized display of movies, etc. with 24 frames/second signals.
Each time or is pressed, the setting is switched.
Auto Off
Press to store.
• 30 Frame Mode
This function enables the optimized display of movies, etc. with 30 frames/second signals.
Each time or is pressed, the setting is switched.
Auto Off
Press to store.
• Jaggies Filter
This function alleviates the phenomenon where jagged diagonal lines can be seen when interlace signals are input, thus enabling a
smoother motion picture display.
Each time or is pressed, the setting is switched.
Auto Off
Press to store.
• Motion Setting
The detecting sensitivity for motion picture is set.
The response of the picture processing is valued in the motion picture priority setting.
Press : to specify still picture priority.
Press : to specify motion picture priority.
Press to store.
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-20
to adjust Red.
to adjust Green.
to adjust Blue.
Progressive Scan Settings
Screen