Fujitsu P42XHA58E Series, P50XHA58E Series User Manual page 26

OTHER ADJUSTMENTS (Continued)
(4) Press or to select "Moving Area".
(5) Press or to select the range for moving the pattern.
Each time you press
Min. Std. Max.
[Min.]: Pattern moves in small range. (About 5 pixels)
[Std.]: Pattern moves in moderate range. (About 10 pixels)
[Max.]: Pattern moves in wide range. (About 15 pixels)
(6) Press to store.
* When the Screen Orbiter function is operated, some screen contents at the top, bottom, right or left of the screen may move offscreen.
Setting RGB Input Signal Compulsorily (Direct Setting)
You can use this option to switch the setting for RGB input signal.
Each time you press or
Auto VGA
[Auto]: The optimum display is obtained automatically for input signals.
[Others]: The optimum resolution setting is fixed for each signal.
Press to store.
* In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA
Switch to the fixed display when the image is not displayed properly.
* Signals that are not applicable depending on the model or input terminals may not be displayed.
Specifying RGB Input Signal (Code Setting)
Normally, use this option in Auto mode.
Displaying white over entire screen (White Screen)
You can use this option to display white over the entire screen to minimize phosphor burn-in.
Each time you press or
Off On
Press to store.
Minimizing phosphor burn-in (Background)
When the screen size was set to "Normal", to reduce "burn-in", the brightness of the part at which left and right images are not displayed
can be set. Normally, we recommend that "Light Gray" be used.
Each time you press or
Black Dark Gray
Press to store.
*Burn-in can still occur if the Normal mode is shown for extended periods.
Displaying System Status (Information)
Displays system operation status.
Select "Information" and press
The "Information" screen will appear.
[Mode]:
[Freq. Scan Mode]: Frequency scanning
[Input Signal]:
[Input Sync]:
[Freq.]:
[Preset No.]:
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
E-26
or , one of the available choices appears in the following sequence:
, one of the available choices appears in the following sequence:
WVGA 480P XGA WXGA
, one of the available choices appears in the following sequence:
, the settings is switched.
Light Gray
.
Input mode appears at the upper right corner of the screen
Video mode
Signal type
Synchronized signal frequency, polarity
RGB code number
+
SXGA SXGA
+
may not be automatically distinguished.
for RGB
for RGB
Information screen
(Video Mode)