Image Setup - D-Link DCS-7513 User Manual

Section 3: Configuration
In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video.
Enable Privacy Mask: The Privacy Mask setting allows you to specify up to 3 rectangular
areas on the camera's image to be blocked/excluded from
recordings and snapshots.
You may click and drag the mouse cursor over the camera image
to draw a mask area. Right-clicking on the camera image brings
up the following menu options:
Disable All: Disables all mask areas
Enable All: Enables all mask areas
Reset All: Clears all mask areas.
Mirror: This will mirror the image horizontally.
Flip: This will flip the image vertically. When turning Flip on, you may
want to consider turning Mirror on as well.
Power Line:
Select the frequency used by your power lines to avoid
interference or distortion.
White Balance: Use the drop-down box to change white balance settings to help
balance colors for different environments. You can choose from
Auto, Outdoor, Indoor, Fluorescent, and Push Hold.
Exposure Mode: Changes the exposure mode. Use the drop-down box to set the
camera for Indoor, Outdoor, or Night environments, or to Moving
to capture moving objects. The Low Noise option will focus on
creating a high-quality picture without noise. You can also create
3 different custom exposure modes. The Max Gain setting will
allow you to control the maximum amount of gain to apply to
brighten the picture.
D-Link DCS-7513 User Manual

Image Setup

41