Deploying The Camera - D-Link DCS-7513 User Manual

Full hd wdr day & night outdoor network camera

Table of Contents

Section 2: Assembly and Installation

Note: Before deploying the camera to a fixed location, it is recommended that you take a photo from the desired location to

ensure an adequate field-of-view.

Step 1

Position the Alignment Sticker in the desired location making sure the Camera

and cable management bracket have sufficient space. Use the dimension

diagrams in "Dimensions" on page 72 for additional reference.

Step 2

Use a 6mm drill bit to make required holes approximately 30mm deep.

Step 3

Remove the Alignment Sticker.

Step 4

Insert wall anchors and affix the mounting plate using the screws provided.

D-Link DCS-7513 User Manual

Deploying the Camera

Table of Contents