Canon VB-H610D Operation Manual page 156

Application (SD Memory Card) Messages
M001 Starting and stopping of SD control module
[info]
Description %1 sdctrl (M001)
%1 Starting or stopping
Meaning The SD control module (sdctrl) has started
or stopped.
M201 SD card write protection [warning]
Description Read only filesystem (M201)
Meaning A write-protected SD memory card is
inserted.
M203 Not enough space on SD card [warning]
Description There is not available space (M203)
Meaning Insufficient SD card capacity.
M301 SD control module error [err]
Description %1 process failure (M301)
%1 mount or unmount
Meaning Mount or unmount process failed.
HTTP Server Messages
H143 User name specification error [notice]
Description (http_auth.c.XXX) get_password failed,
IP:%1 (H143)
%1 IP address
Meaning An unknown user was specified in user
authentication.
H144 Password specification error [notice]
Description (http_auth.c.XXX) password doesn't match
for %1 username%2, IP:%3 (H144)
%1 URL XSS vulnerability countermeasure
implementation (process equivalent to ftpd)
%2 User Name
%3 IP address
Meaning A wrong password was specified in user
authentication.
156
H201 Timeout disconnect [warning]
Description a request for %1 timed out after writing %d
seconds (H201)
%1 Request URI
%d 360 (Timeout time)
Meaning Disconnected due to HTTP server timeout
(360 sec.).
System Messages
S001 System started [info]
Description starting paramd (S001)
Meaning Parameter management module started.
S002 System settings changed [info]
Description Updated system settings. (S002)
Meaning Settings not requiring rebooting were
changed.
S010 Event service started [info]
Description starting event (S010)
Meaning The event service was started.
S011 Event service shut down [info]
Description shutdown event (S011)
Meaning The event service was shut down.
S012 External device service started [info]
Description starting extio (S012)
Meaning The external device input/output service
was started.
S013 External device service shut down [info]
Description shutdown extio (S013)
Meaning The external device input/output service
was shut down.
S014 Timer service started [info]
Description starting timer (S014)
Meaning The timer service was started.
S015 Timer service shut down [info]
Description shutdown timer (S015)
Meaning The timer service was shut down.