Connecting The Power Cord - Sharp PG-LW2000 Operation Manual

Equipment
connected equipment
Audio equipment
audio output
RCA audio
HDMI output
Note
• You can select HDMI or AUDIO in the INPUT list. (See page 27.)
This projector is able to process the following signals when connected to HDMI
equipment:
• Video signal: For details, see "Digital Support" in the list of "Compatibility Chart" on page 64.
• Audio signal: Linear PCM audio
• Sampling frequency: 48kHz/44.1kHz/32kHz

Connecting the Power Cord

Plug the supplied power cord into the AC
socket on the rear of the projector. Then
plug into AC outlet.
Terminal on
ø3.5 mm ø3.5 mm stereo minijack to RCA audio cable
(commercially available)
terminal
RCA audio cable (commercially available)
output
terminal
Cables for a camera or a video game
Audio
output
terminal
HDMI cable (commercially available)
terminal
Cable
Power cord Power cord
(supplied) (supplied)
Terminal on the
projector
AUDIO
HDMI
AC socket AC socket
To AC outlet To AC outlet
21