Table of Contents
Advertisement
BJ53.
Executing The GETSEC Instruction While Throttling May Result in a
Processor Hang
Problem:
If the processor throttles, due to either high temperature thermal conditions or due to
an explicit operating system throttling request (TT1), while executing GETSEC[SENTER]
or GETSEC[SEXIT] instructions, then under certain circumstances, the processor may
hang. Intel has not been observed this erratum with any commercially available
software.
Implication:
Possible hang during execution of GETSEC instruction.
Workaround:
None identified.
Status:
For the steppings affected, see the Summary Tables of Changes.
BJ54.
A Write to the IA32_FIXED_CTR1 MSR May Result in Incorrect Value in
Certain Conditions
Problem:
Under specific internal conditions, if software tries to write the IA32_FIXED_CTR1 MSR
(30AH) a value that has all bits [31:1] set while the counter was just about to overflow
when the write is attempted (i.e. its value was 0xFFFF FFFF FFFF), then due to this
erratum the new value in the MSR may be corrupted.
Implication:
Due to this erratum, IA32_FIXED_CTR1 MSR may be written with a corrupted value.
Workaround:
Software may avoid this erratum by writing zeros to the IA32_FIXED_CTR1 MSR,
before the desired write operation.
Status:
For the steppings affected, see the Summary Tables of Changes.
BJ55.
Instruction Fetch May Cause Machine Check if Page Size and Memory
Type Was Changed Without Invalidation
Problem:
This erratum may cause a machine-check error (IA32_MCi_STATUS.MCACOD=0150H)
on the fetch of an instruction that crosses a 4-KByte address boundary. It applies only
if (1) the 4-KByte linear region on which the instruction begins is originally translated
using a 4-KByte page with the WB memory type; (2) the paging structures are later
modified so that linear region is translated using a large page (2-MByte, 4-MByte, or 1-
GByte) with the UC memory type; and (3) the instruction fetch occurs after the paging-
structure modification but before software invalidates any TLB entries for the linear
region.
Implication:
Due to this erratum, an unexpected machine check with error code 0150H may occur,
possibly resulting in a shutdown. Intel has not observed this erratum with any
commercially available software.
Workaround:
Software should not write to a paging-structure entry in a way that would change, for
any linear address, both the page size and the memory type. It can instead use the
following algorithm: first clear the P flag in the relevant paging-structure entry (e.g.,
PDE); then invalidate any translations for the affected linear addresses; and then
modify the relevant paging-structure entry to set the P flag and establish the new page
size and memory type.
Status:
For the steppings affected, see the Summary Tables of Changes.
Specification Update
37
Hide quick links:
Advertisement
Table of Contents
