Windows Nt 3.51 - D-Link DirectPort DMF-560TXD User Manual

box; put the driver diskette into floppy drive
then press OK.
13. Select Enhanced mode NDIS3 for.... then press
OK.
14. Follow Windows instructions to complete the
installation and exit Windows
15. Reboot the computer to run with WFW 3.11.
2.2.5. Windows NT 3.51 & NT 4.0
Installation
Getting Start for Windows NT3.51
1. Run Windows NT 3.51
2. Login with a full access level , i.e.
ADMINISTRATOR
3. Remove all existing network support
-- open Program Manager
Control Panel Network
-- remove all existing network components
Note: remove all adapters first, then servers,
then workstations, etc.
4. Remove all serial port support
-- open Program Manager
Control Panel Ports
-- remove all the COM port devices
Note: If problems occur during removing the
COM ports, check if the NT has been
updated to the lastest release from Microsoft.
-- after all serial port devices are removed, press
Close
Add PCMCIA to Your Laptop
- 11 -
Main group
Main group