Windows 98/Me Network Component Configuration - D-Link DFE-690TXD User Manual

Windows 98/Me Network Component
Configuration
Once the driver has been installed, you must make some changes to your
network settings. Click Start à Settings à Control Panel à Network and
make sure that you have all the following components installed.
§ Client for Microsoft Networks
§ D-Link DFE-690TXD
§ NetBEUI
§ TCP/IP
If any components are missing, click the Add button to add them. Microsoft
includes all of these protocols in Windows. After you click Add, highlight the
component you need, click Add, highlight Microsoft, then double-click on the
item you want to add.
If you are using Windows 95 or Windows 98, enable the File and Printer
Sharing to make your computer visible on the network.
Click the Identification tab. Type the name of your computer in the computer
name box. Make up a name that is unique among the computer names on your
network.
Type the name of your workgroup in the workgroup box. The name you type
should be the same workgroup name in use by all of the other PCs on the
network. If one computer on your network has a different workgroup name
than the others, that computer will not be shown in the same workgroup view.
- 11 -