Table of Contents
Advertisement
6.
APPENDIX A: NDIS2 AND
ODI DRIVERS FOR WFW 3.11
NDIS2 Driver for Workgroups
1.Run Windows for Workgroups and click Network
Setup icon in Network group.
2.In Network Settings dialog box, click
Networks... button to select the network operating
system.
3.In Networks dialog box, check the radio button
before Install Microsoft Windows Network and
No Additional Network. Press OK to go back the
Network Settings screen.
4.Click Drivers... button to select network driver.
5.In Network Drivers dialog box, press Add
Adapter... button to enter Add Network Adapter
dialog box. Select Unlisted or Updated Network
Adapter then press OK.
6.Windows will prompt a Install Driver dialog box.
In this time, put the driver diskette into floppy
drive then press OK.
7.Select the Real mode NDIS2 for... string then
press OK.
8.Follow Windows instructions to complete the
installation and exit Windows.
9.Run INSTALL.EXE from root directory of driver
diskette.
10.Select Windows for Workgroup in Network
Operating System screen.
11.If current settings are acceptable, select Start
Installation and go to step 13. Otherwise, select
Modify Parameters to make settings changed.
- 35 -
Advertisement
Table of Contents
