Table of Contents
Advertisement
Example:.If.port.phone.numbers.are.8001,.8002,.etc.and.it.is.required.that.calls.starting.with.91.should.be.directed.to.the.local.ports.then.add.
a.destination.entry.with.name.as."Local.Destinations".with.destination.type.as.dialed.local.FXO.port..And.in.the.ACR.Table.add.an.entry.with.
prefix.as.91.and.strip.2.digits.pointing.to.this.destination..Now.if.user.dials.918001,.then.call.will.end.up.on.port.1,.918002.it.will.end.up.on.port.
2.and.so.on.
3..Hunt.Group:.Select.this.to.point.the.destination.to.one.of.the.configured.hunt.groups.
Example:.Say.it.is.required.that.if.customer.dials.help.desk.number.(say.9901).then.call.should.be.established.with.the.first.free.port,.in.that.
case.add.a.destination.entry.with.name."Help.Desk".pointing.to.hunt.group.of.all.ports.and.add.a.ACR.entry.with.prefix.as.990.pointing.to.this.
destination..Here.the.phone.numbers.of.ports.are.9901,.9902,.etc.
4..VoIP.Number.@.VoIP.Server:.Select.this.to.point.the.destination.to.a.particular.endpoint.number.which.is.registered.on.same.VoIP.server.as.
configured.on.this.device.
Example:.Say.if.Albert.(using.port.1).requires.that.as.soon.as.he.goes.off.hook.the.call.should.be.established.with.Peter.(phone.number.6500.
registered.on.same.VoIP.server).then.add.a.destination.with.name.as."Peter".with.type.as.VoIP.number.6500.and.in.port.configuration.enable.
hotline.for.port.1.to.this.destination.
5..Forward.to.VoIP.Server:.Select.this.to.point.the.destination.to.configured.VoIP.Server..This.helps.in.inter-office.communications.
Example:.Say.it.is.required.to.forward.all.calls.starting.with.1303.to.VoIP.server.then.add.a.destination.with.name.as."VoIP.Server".of.type.
forward.to.VoIP.server.and.in.ACR.add.entry.to.direct.all.calls.starting.with.1303.to.this.destination.
6..VoIP.End.Point:.This.can.be.used.to.configure.the.destination.to.make.calls.to.other.SIP.clients.without.going.through.the.configured.SIP.server..
This.feature.does.not.require.the.device.to.be.registered.to.server.
User ID:
User.ID.or.phone.number.of.the.SIP.client..Usually.this.is.the.user.part.of.the.SIP.URL.
Host IP/Domain:
Enter.the.IP.Address.or.domain.name.of.the.SIP.client.
Port:
Enter.the.port.address.of.the.SIP.client..Default:.5060.
Example:.If.the.SIP.URL.of.client.is."sip:bob@somedomain.com:5060",.then.configure."bob".in.User.ID.field,."somedomain.com".in.Host.Domain.
and."5060".in.Port.
D-Link DIV-140 User Guide
Advertisement
Table of Contents
