Table of Contents
Advertisement
Server Settings:
The. SIP. Server. specific. parameters. are. configured. here.. If.
there.is.no.SIP.server.being.used.then.the.fields.in.this.section.
can.be.left.empty.
Primary Server
Enter.the.IP.address.or.domain.name.of.the.primary.SIP.server..
Address:
Default:.www.sipproxy1.com.
Port:
Enter.the.primary.SIP.server.port.in.this.field..Default:.5060.
Secondary Server:
Enter. the. IP. address. or. domain. name. of. secondary. SIP.
server..This.is.used.as.backup.in.case.if.primary.server.is.not.
reachable..Default:.www.sipproxy2.com.
Port:
Enter. the. secondary. SIP. server. port. in. this. field.. Default:.
5060.
Registration Timeout:
This.specifies.the.interval.at.which.the.registration.should.be.
updated.with.server..Range:.40.to.2000000.seconds..Default:.
3600.seconds.
Note:.When.STUN.is.enabled.this.field.should.be.set.to.a.value.
smaller.than.the.binding.inactivity.timeout.on.the.NAT/Router..
This.way.the.binding.for.SIP.local.port.will.be.kept.alive.
Uri Scheme:
This.feature.will.be.supported.in.future.releases.
Transport:
This.feature.will.be.supported.in.future.releases.
Use Same
Enable.this.to.use.the.same.authentication.parameters.specified.
Authentication for
in.this.section.for.all.ports..Enabling.this.setting.will.disable.all.authentication.fields.on.the.Port Configuration > General page..Default:.Disable.
All Channels:
Phone Number:
This.specifies.the.phone.number.using.which.other.devices.can.call.this.device..This.field.accepts.only.numbers.and.can.be.a.maximum.of.20.
characters.
Display Name:
This.is.used.only.for.display.purposes..This.field.accepts.only.letters,.digits,.hyphen.and.underscore.and.can.be.a.maximum.of.30.characters.
Authentication User ID:
Used.to.authenticate.the.device.with.a.SIP.server..This.field.accepts.only.letters,.digits,.hyphen.and.underscore.and.can.be.a.maximum.of.30.
characters.
D-Link DIV-140 User Guide
VoIP Configuration
1
Advertisement
Table of Contents
