Security Audit Log Menu; Set Date And Time Menu - Lexmark CS510 User Manual

Understanding the printer menus

Security Audit Log menu

Use
Export Log
Delete Log
Yes
No
Configure Log
Enable Audit
Yes
No
Enable Remote Syslog
No
Yes
Remote Syslog Facility
0–23
Severity of Events to Log
0–7

Set Date and Time menu

Use
Current Date and Time
Manually Set Date and Time
Time Zone
Automatically Observe DST
On
Off
Enable NTP
On
Off
To
Let an authorized user export the audit log.
Notes:
•
To export the audit log from the printer control panel, attach a flash drive to
the printer.
•
The audit log can be downloaded from the Embedded Web Server and saved
on a computer.
Specify whether or not audit logs are deleted.
Note: Yes is the factory default setting.
Specify how and whether or not audit logs are created.
Notes:
•
Enable Audit determines if events are recorded in the secure audit log and
remote syslog. No is the factory default setting.
•
Enable Remote Syslog determines if logs are sent to a remote server. No is the
factory default setting.
• Remote Syslog Facility determines the value used to send logs to the remote
syslog server. 4 is the factory default setting.
• If the security audit log is activated, then the severity value of each event is
recorded. 4 is the factory default setting.
To
View the current date and time settings for the printer.
Enter the date and time.
Notes:
•
Date/Time is set in YYYY-MM-DD HH:MM:SS format.
•
Manually setting the date and time sets "Enable NTP" (Network Time Protocol)
to On.
Select the time zone.
Note: GMT is the factory default setting.
Set the printer to use the applicable daylight saving time (DST) start and end times
associated with the printer Time Zone setting.
Note: On is the factory default setting and uses the applicable Daylight Saving Time
associated with the Time Zone setting.
Enable Network Time Protocol, which synchronizes the clocks of devices on a
network.
Note: On is the factory default setting.
97