Networking; Preparing To Set Up The Printer On An Ethernet Network - Lexmark CS510 User Manual

Additional printer setup
Use the
1 Rear USB port
2 USB printer port
3 Ethernet port
4 USB wireless port
5 Security lock port
6 Printer power cord socket Connect the printer to a properly grounded electrical outlet.

Networking

Notes:
•
Purchase a MarkNet
For information on installing the wireless network adapter, see the instruction sheet that came with the
adapter.
•
A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP), Wi-Fi
Protected Access (WPA), WPA2, and 802.1X - RADIUS are types of security used on a network.

Preparing to set up the printer on an Ethernet network

To configure your printer to connect to an Ethernet network, organize the following information before you begin:
Note: If your network automatically assigns IP addresses to computers and printers, continue on to installing the
printer.
• A valid, unique IP address for the printer to use on the network
•
The network gateway
3
2
1
To
Attach a keyboard to the printer.
Connect the printer to a computer.
Connect the printer to a network.
Attach an optional wireless network adapter.
Lock the system controller board.
TM
N8352 wireless network adapter first before setting up the printer on a wireless network.
4
5
6
41