Rear Cover
Description
Rear cover
Remove the main rear cover to access internal components. The cover is secured by three Phillips
screws – two captive in the bottom corners, one non-captive above the stand.
To remove the rear cover:
1.
Prepare the computer for disassembly (see
on page
2.
Loosen the captive two Phillips screws (1) that secure the cover to the computer.
3.
Remove the non-captive Phillips screw (2) that secures the cover to the computer.
4.
Lift the cover off the computer (3).
To replace the rear cover, reverse the removal procedures.
38
Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
37).
Preparing to Disassemble the Computer
Spare part number
669985-001