Security Bracket - HP 1155 Maintenance And Service Manual

Security Bracket

The security bracket is secured with two screws. It is not spared.
To remove the security bracket:
1. Prepare the computer for disassembly (see
on page
2. Remove the rear cover (see
3. Remove the two screws that secure the security bracket to the computer.
4. Lift the security bracket straight up and out of the computer.
To install the security bracket, reverse the removal procedures.
74 Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
37).
Rear Cover on page
Preparing to Disassemble the Computer
38).