Server URL Setting
License Server IP
PI AES Data
Self Diagnosis for
PI AES Log
View PI AES Log
DTV Open Cable
REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets you
deliver TV firmware updates, cloning data, channel maping changes, S-LYNK REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are avalible only in standalone
mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the REACH server
product for more operating information.
Widget Mode ON/OFF.
Vender Server Select type of solution (Vender Server/ SINC Server).
Set server URL.
Set server IP.
Virtual Standby mode On/Off.
When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W (Depending
on the size of the TV screen).
IPTV mode On/Off.
Source Menu On/Off.
Configures CAS support. Applies to only the NB673, NB677, and NB678 models.
OFF : Turns off CAS support.
LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
Pro:idiom : Select to turn on Pro:Idim CAS support only.
LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS.
Displays the current state of Pro:Idion AES
Lets you check the state of the TV picture and sound.
Picture Test : Use to check for picture problems. If the problem appears in the test
picture, select YES, and then follow the directions on the screen
Sound Test : Use to check for sound problems. If the problem occurs during the
test, select YES, and then follow the directions on the screen
Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB.
If you have any problems with the Pro:idiom encryption channel or the communications
with the SI STB or SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key
Loss appears to have failed and the Pro:Idim encryption channel has failed to play
content, first check the broadcasting systems related to Pro:Idiom encryption. If your
broadcasting system does not have a problem, contact Samsung Service. If STB SI
Vendor Setting appears to have failed and communication with the SI STB or SBB has
failed, first check your SI STB or SBB. If your SI STB or SBB does not have a problem,
contact Samsung Service.
Displays the state of Pro:Idiom AES operation.
Display/Save Pro:idiom AES log.
Lets you upgrade the TV SW with a USB memory stick. Refer to page 37~38.
Lets you check the state of the TV picture by displaying picture test patterns. Press the
Menu button turn off the test patterns and exit.
Lets you control the AGC gain of the analog cable channels. Don't change the default
value unless problems occur.
Lets you control the AGC gain of the digital cable channels. Don't change the default
value unless problems occur.
Returns all settings on the TV to their factory defaults.