Logo Display Time
Clone TV to USB
Clone USB to TV
IPG Room Type
Hotel ID Setting
Display the Welcome Message for 5 seconds when the TV turns On.
Edit the Welcome Message.
Turns the Hospitality logo feature on/off. Select from Off, BMP, AVI, or Both. When you
select BMP, AVI, or Both, you select the file to use and turn the logo feature on. The Logo
is shown during the initial turn on for the amount of time set in "Logo Display Time"
Downloads the Hospitality logo.
Hospitality logo file requirements:
BMP or AVI files only.
Max file size : BMP - 960 X 540. AVI - 50MB.
The file can only be named samsung.bmp or samsung.avi.
Hospitality Logo Display Time (3/5/7 seconds).
Clone the current TV option values to a USB memory device.
Clone the saved TV option values in a USB memory device to the TV.
If you set Setting Auto Initialize to On, and the TV's power is turned off and on, guest
side menu items are restored to their cloned values. See page 35.
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH
contents is downloaded from the REACH server to the TV :
Off : REACH data is updated on the TV only at the time you set in REACH Server
1hour : Every 1 hours
2hour : Every 2 hours
12:00 am : Every 12:00 am.
2:00 am : Every 2:00 am.
12:00 pm : Every 12:00 pm.
2:00 pm : Every 2:00 pm.
ON : Whenever the TV enters standby mode (the power cord is plugged in and the
power is off), the REACH data is updated on the TV.
OFF : The REACH data is only updated on the TV at the REACH server update
Assign a DTV channel number to carry the update REACH data. This channel number
must be the same as the number set on the Reach server.
Displays the current REACH data version.
Select the group ID of the REACH server. (Refer to the REACH server manual for more
ON : The S-LYNK REACH menu is displayed.
OFF : The S-LYNK REACH menu is not displayed.
ON : The TV sound of the current TV source is continouly outputted even when the
S-LYNK REACH menu is displayed.
OFF : The TV sound of the current TV source is stopped when the S-LYNK REACH
menu is displayed.
Selects the IPG room type of the REACH server. (Refer to the REACH server manual for
the more information.)
ON : The TICKER content is displayed.
OFF : The TICKER content is not displayed.
Connect to a wired or wireless network and access the Internet.
Set a Hotel ID.
Download, update, organize, and delete apps, Use WebBrowser or Hospitality Browser.