Table of Contents
Advertisement
The LAN port (RJ-45) on the docking station does not work
after I plugged in the docking station.
This could be caused by following:
The docking station power adapter is not plugged in properly. Please
•
make sure the power adapter is plugged in properly to the power outlet
and the docking station.
•
The LAN cable is not correctly connected. Please ensure the LAN (RJ-
45) cable is plugged in properly.
The drivers are not correctly installed. Please install the driver from the
•
Driver CD and reboot your system before reconnecting your LAN
cable.
What graphics interface that USB docking station support?
The provided docking station driver includes a software-based graphics
driver. Not all hardware acceleration methods are available to applications.
The table below provides more support information.
Interface
Windows XP
DirectX 10
No
DirectX 9
No
DirectX VA
No
Direct 3D
No
DirectDraw
Yes
OpenGL
No
GDI+
No
* With Windows Aero enabled.
Windows Vista / Windows 7*
Yes, if supported by the primary graphics card.
Yes, but full screen mode is not available. It
displays only in window mode.
Yes, if supported by the primary graphics card.
Yes, but not available when the docking station
is set as the primary display.
Yes
Yes, but full screen mode is not available. It
displays only in window mode.
Yes, but full screen mode is not available. It
displays only in window mode.
14
Advertisement
Table of Contents
