D-Link DXS-3600-EM-8XS Hardware Installation Manual page 31

DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide
Port Specifications
LED Indicators
Location LED
Per Device Power1, Power 2
Management
(MGMT)
Console
Fan 1, Fan 2, Fan 3
SD
Stacking ID
(7-segment LED)
SFP+ Direct Attached Cables (DAC):
• Direct Attached Cables are cables with a built-in SFP+ transceivers at both ends.
• DEM-CB100S (10GbE SFP+ 1m Direct Attach Cable)
• DEM-CB300S (10GbE SFP+ 3m Direct Attach Cable)
• DEM-CB700S (10GbE SFP+ 7m Direct Attach Cable)
Color
Green
Amber
Green
Green
Green
Amber
Green
Red
Green
Status
Light on (Solid)
Light off
Light on (Solid)
Light blinking
Light on (Solid)
Light blinking
Light off
Light on (Solid)
Light off
Light on (Solid)
Light off
Light on (Solid)
Light blinking
Light on (Solid)
Light blinking
Light off
Light on (Solid)
Light on (1-12)
Light on (H)
Light on (h)
Light on (E)
Light on (G)
25
Description
Power on
Power off
Power supply failure
Power supply module
present, but AC or DC input is
problematic.
A reversed airflow power
supply was inserted.
Link present. No data
transmission.
Activity. Data transmission.
No link present or the port
was shutdown.
Console on
Console off
Diagnostics pass. Functioning
normal.
No power.
Busy booting or running
diagnostics.
Fan failure or reversed airflow
fan was inserted.
SD plugged in.
Busy reading/writing.
No link.
Read/Write failure.
Stacking number displayed.
Stacking Master
Stacking Backup Master
System self-test error
Safeguard Engine in
exhausted mode