DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide
Power Supply Module
Connect the one end of the AC power cord supplied to the AC power connector and the other end into a properly
grounded electrical outlet. The switch will automatically adjust the power setting to adapt to any voltage supply in the
range from 100~240VAC at 50~60Hz.
In addition, an optional second power supply module can be plugged into the second power supply connector slot
displayed above. When the primary power connection fails, the secondary power connection will take over all the
power immediately and automatically. The primary and secondary power supply can be either AC supplied or DC
supplied, depending on the power supply module inserted.
The power supply modules are hot-swappable, meaning, that they can be inserted and removed while the switch is
powered on. This feature enhances the reliability of this switch. However, in the event that a power failure might occur
in the environment and no UPS is used, as a precaution, unplug the power cord from the switch. After the return of
power, you can plug the power cord back into the Switch's power connector.
Fan Module
The fan modules on this switch can provide front-to-back or back-to-front airflow depending on type on fan module
installed. Another unique smart fan feature is that fans are capable to automatically ajust their speed depending on
the IC sensor reading of the temperature required. This feature is so sensitive that it can even adjust the speed of the
fan to accurately control the internal temperature.
Side Panel Description
Located on the side panels of the switch are heat and fan vents that are used to dissipate heat. Do not block these
openings. Leave at least 4 inches of space at the rear and sides of the switch for proper ventilation. Be reminded that
without proper heat dissipation and air circulation, system components might overheat, which could lead to system
failure or even severely damage components.
Figure 1-7 Side panels of the DXS-3600-16S
Figure 1-8 Side panels of the DXS-3600-32S
6