Ac Adaptor - VTech MobiGo 2 Touch Learning System User Manual

• Using a VTech adaptor (AC/DC 7.5V
recommended.
• Make sure the unit is turned OFF.
• Plug the power jack into the 7.5V / 9V
socket at the upper right corner of the
unit (see illustration).
• Plug the AC adaptor into a wall socket.
NoTe:
1. The use of an adaptor will override the batteries. When the toy is not going to be in use
2. When disconnecting any plugs from the MobiGo
3. When you finish playing, always turn the MobiGo
4. Do not wrap the AC adaptor cord around the MobiGo
5. To preserve energy, MobiGo
STANDARD GUIDElINES FOR ADAPTOR TOyS
• This toy is not intended for use by children under 3 years old.
• Only use the recommended toy transformer with this toy.
• The adaptor is not a toy.
• Never clean a plugged in toy with liquid.
• Do not connect the toy to more than the recommended number of power
supplies.
• Do not leave the toy plugged-in for extended periods of time.
135800 MobiGo2 M 20120510.indd 4

AC Adaptor

AC Adaptor
400mA or 9v
for an extended period of time, unplug the adaptor.
plug itself rather than by the cord.
both the wall socket and the MobiGo
screen.
input. Press the ON/OFF button to turn the MobiGo
300mA ) is
2 or wall outlet, carefully pull by the
®
2 off and unplug the AC adaptor from
®
2.
®
®
® 2 will automatically turn off after several minutes without
2 on again.
®
2, or it may damage the touch
4
2012-5-30 10:17:12