Care & Maintenance; Troubleshooting - VTech MobiGo 2 Touch Learning System User Manual

1. Keep your MobiGo
or abrasives.
2. Keep it out of direct sunlight and away from direct sources of heat.
3. Remove the batteries when not using it for an extended period of time.
4. Avoid dropping it. NEVER try to dismantle it.
5. Always keep the MobiGo
6. Please regularly examine the transformer, checking for damage to the cord, plug,
transformer or other parts. Do not use the transformer if there is any damage to it.
WARNING
A very small percentage of the public, due to an existing condition, may experience epileptic
seizures or momentary loss of consciousness when viewing certain types of flashing colors or
patterns. While the MobiGo
risks, we do recommend that parents supervise their children while they play video games. If
your child experiences dizziness, altered vision, disorientation, or convulsions, discontinue use
immediately and consult your physician.
Please note that focusing on an LCD screen at close range and handling video game controls
for a prolonged period of time may cause fatigue or discomfort. We recommend that children
take a 15 minute break for every hour of play.
Before seeking assistance, check the following information.
Problem
LCD display works, but
there's no sound.
LCD display turns ON
and OFF immediately.
No picture (or incorrect
picture) on LCD, and
pressing the OFF
button has no effect.
135800 MobiGo2 M 20120510.indd 16
Care & maintenance Care & maintenance
2 clean by wiping it with a slightly damp cloth. Never use solvents
®
®
2 Touch Learning System does not contribute to any additional
®

Troubleshooting

Troubleshooting
Possible Reason
volume is turned down.
The headphones are
connected.
Battery power is low.
Cartridge not inserted
firmly enough.
Program needs to be
reset.
2 away from water.
Solution
Adjust the volume control.
Unplug headphones from the headphone jack.
Replace batteries.
Make sure the cartridge is firmly inserted.
Disconnect all power supplies (batteries and
adaptor), then reconnect all power supplies.
Unplug the cartridge and check if there's any
dirt on it. Clean it. Then reinsert the cartridge.
16
2012-5-30 10:17:16