Ac Adaptor - VTech InnoTab 2 Baby User Manual

• Only batteries of the same or equivalent type as recommended
are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended number
of power supplies.
• Do not dispose of batteries in fire.
NOTE: When InnoTab
may see this icon appear on the screen
that battery power is low, and you should replace the
batteries soon. Battery time remaining once the icon first
appears is approximately 10-30 minutes, depending on the
type of batteries in use. After that, InnoTab
the very low battery screen for 3 seconds, and then will turn
off automatically.
To preserve battery life, InnoTab
automatically when there is no input for a few minutes.

AC Adaptor

• Using a VTech
®
recommended.
• Make sure the tablet is turned off.
• Plug the adaptor (sold separately) into the AC adaptor jack on the top of
InnoTab
2 Baby.
®
• Plug the adaptor into a wall socket.
NOTE: The use of an adaptor will override the batteries. When the toy is not
going to be used for an extended period of time, unplug the adaptor.
2 Baby is running on batteries, you
®
2 Baby will shut down
®
adaptor (AC/DC 7.5V
. This indicates
2 Baby will show
®
400mA
or 9V
300mA
) is
5