• Rechargeable batteries are only to be charged under adult supervision
(if removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (Ni-MH).
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended number of power
supplies.
• Do not dispose of batteries in fire.
NOTE: When the V.reader
appear on the screen
that battery power is low, and you should
replace the batteries soon. Battery time
remaining once the icon first appears is
approximately 10-30 minutes, depending
on the type of batteries in use. After that,
the V.reader
seconds, and then will turn off automatically.
To preserve battery life, the V.reader
several minutes without input.The V.reader
pressing the on/oFF button.
AC Adaptor
AC Adaptor
• Use a standard 9V
®
use of a VTech
• Make sure the unit is turned off.
• Plug the power cord into the 9V socket on the bottom of the V.reader
• Plug the AC adaptor into a wall socket.
NOTE: The use of an adaptor will override the batteries. When the toy is not going
to be in use for an extended period of time, unplug the adaptor.
Standard Guidelines for Adaptor Toys
Standard Guidelines for Adaptor Toys
• The toy is not intended for use by children under 3 years old.
• Only use the recommended adaptor with the toy.
• The transformer is not a toy.
• Never clean a plugged-in toy with liquid.
• Never use more than one adaptor.
• Do not leave the toy plugged in for extended periods of time.
is running on batteries, you may see this icon
tM
. This indicates
will show the screen for 5
tM
300mA
9V AC/DC adaptor.
will automatically turn off after
tM
can be turned on again by
tM
AC/DC adaptor. We recommend the
.
tM
Need help?
Do you have a question about the V.Reader Interactive E-Reading System and is the answer not in the manual?
Questions and answers