Ac Power Supplies And Alarms - Dell Force10 C150 Manual

Table A-1. Alarm Events and Reporting
Module Alarm Event
Line card Hardware failure
Exceeds high-temperature limit
Exceeds warning temperature limit
Individual interface fails
RPM (Non-redundant Configuration with 1 RPM)
Exceeds high temperature limit
Exceeds warning temperature limit
RPM fails but Control Processor (CP) is OK
a.

AC Power Supplies and Alarms

During system boot, if a redundant power supply is removed or fails, FTOS generates a minor alarm
message.
If only two power supplies are installed and one of them fails, FTOS generates an alarm and an SNMP
trap (if configured), and lights the RPM alarm LED and power supply LED.
52 | Alarms
Alarm LED Reported in
event log
major (red) major
major (red) major
minor (amber) minor
minor (amber) reported
major (red) major
minor (amber) minor
major (red) major
Status LED on
Module
amber
unlit
green
a
amber
unlit
green
amber