C150 System Installation Process Overview - Dell Force10 C150 Manual

C150 System Installation Process Overview

The Dell Force10 recommended installation process is summarized below.
Step Task
Prepare the site.
1
Unpack the chassis and components.
2
Install the chassis in a rack.
3
Install the fan tray.
4
Install the RPMs and line cards.
5
Connect console and management cables.
6
Install the power supplies.
7
Switch on all of the power supplies.
8
10 | Overview
Relevant Section in the Manual
Site Selection Criteria on page 11
Shipping and Storing Components on page 12
Installing the Chassis into an Equipment Rack on page 14
Fan Tray on page 39
RPMs and Line Cards on page 17
Management Cable Pinout on page 23
AC Power Supply Units on page 25
Powering Up on page 35