Uninstalling The Printer Driver Package; Setting Up The Printer - Samsung SL-M3870FW User Manual

Installing driver over the network
6 Run the install script.
"./install –i"
install is the installer script file which is used to install or uninstall the
UNIX Printer Driver package.
Use "chmod 755 install" command to give the permission to the
installer script.
Execute the ". /install –c" command to verify installation results.
7
Run "installprinter" from the command line. This will bring up the Add
8
Printer Wizard window. Setup the printer in this window referring to
the following procedures.
On some UNIX OS, for example on Solaris 10, just added printers may not be
enabled and/or may not accept jobs. In this case run the following two
commands on the root terminal:
"accept <printer_name>"
"enable <printer_name>"

Uninstalling the printer driver package

The utility should be used to delete the printer installed in the system.
a Run "uninstallprinter" command from the terminal.
It will open the Uninstall Printer Wizard.
The installed printers are listed in the drop-down list.
b Select the printer to be deleted.
c Click Delete to delete the printer from the system.
d Execute the ". /install –d" command to uninstall the whole package.
e To verify removal results, execute the ". /install –c" command.
To re-install it, use the command ". /install –i" to reinstall the binaries.

Setting up the printer

To add the printer to your UNIX system, run 'installprinter' from the command
line. This will bring up the Add Printer Wizard window. Setup the printer in this
window according to the following steps:
1 Type the name of the printer.
2 Select the appropriate printer model from the model list.
3 Enter any description corresponding to the type of the printer in the
Type field. This is optional.
2. Using a Network-Connected Machine
168