Samsung SL-M3870FW User Manual page 60

User manual ver.1.0 (english)
Hide thumbs Also See for SL-M3870FW:
Table of Contents

Advertisement

Basic copying
To scale the copy by directly entering the scale rate
1
Select
(copy) >
Custom on the control panel.
Or select
(Menu) > Copy Feature > Reduce/Enlarge> Custom on
the control panel.
2
Enter the copy size you want using the numeric keypad.
3
Press OK to save the selection.
4
Press
(Stop/Clear) button to return to ready mode.
When you make a reduced copy, black lines may appear at the bottom of
your copy.
17
ID card copying
Your machine can print 2-sided originals on one sheet.
The machine prints one side of the original on the upper half of the paper and
the other side on the lower half without reducing the size of the original. This
feature is helpful for copying a small-sized item such as business card.
(Menu) > Copy Feature > Reduce/Enlarge >
• The original must be placed on the scanner glass to use this feature.
• If the machine set to Eco mode, this feature is not available.
Depending on the model, the operating procedure may differ.
Press ID Copy on the control panel.
1
Or select
(Menu) > Copy Feature > Layout > ID Copy on the
control panel.
2
Place the front side of an original facing down on the scanner glass
where arrows indicate as shown. Then, close the scanner lid.
Place Front Side Press [Start] appears on the display.
3
Press
(Start).
4
Your machine begins scanning the front side and shows Place Rear Side
Press [Start].
2. Menu Overview and Basic Setup
60

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents