Samsung SL-M3870FW User Manual page 187

Wireless network setup
11 After searching, the window shows the wireless network devices. Select
the name (SSID) of the access point you want to use and click Next.
If the wireless network is already set up, the Wireless Network
Information window appears. Select I want to install software with
the current settings. (Recommended). Then, click Next.
When you set the wireless configuration manually, click Advanced Setting.
• Enter the wireless Network Name: Enter the SSID of the access point
(SSID is case-sensitive).
• Operation Mode: Select Infrastructure.
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
WPA Personal or WPA2 Personal: Select this option to authenticate the
print server based on the WPA Pre-Shared Key. This uses a shared secret
key (generally called Pre Shared Key pass phrase) that is manually
configured on the access point and each of its clients.
• Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES,
TKIP, AES)
• Network Password: Enter the encryption network password value.
• Confirm Network Password: Confirm the encryption network
password value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
The wireless network security window appears when the access point has
security enabled.
Enter the Network Password of the access point (or router).
If your printer supports Wi-Fi Direct, the following screen appears.
12
Click Next.
• Can start to build Wi-Fi Direct by using
(see "Setting up Wi-Fi Direct" on page 193).
• Wi-Fi Direct Name: The default Wi-Fi Direct Name is the model name
and the maximum length is 22 characters.
• Password setting is the numeric string, and the size is 8 ~ 64 characters.
Samsung Easy Printer Manager
2. Using a Network-Connected Machine
187