Samsung SL-M3870FW User Manual page 221

System setup
Item
Sets the language of the text that appears on the control
Language
panel display.
Sets the machine's default mode among fax mode, copy
Default Mode
mode, or scan mode.
Default Paper Size You can set the default paper size to use.
Sets how long the machine waits before going to power
save mode.
Power Save
When the machine does not receive data for an extended
period of time, power consumption is automatically
lowered.
Sets the time that the machine remembers previously
System Timeout used copy settings. After the timeout, the machine
restores the default copy settings.
Sets the length of time the printer waits before printing
Job Timeout the last page of a print job that does not end with a
command to print the page.
When this option is "On", you can wake up the machine
from the power saving mode with the following actions:
• loading paper in a tray
Wakeup Event
• opening or closing the front cover
• pulling a tray out or pushing a tray in
• connecting a USB memory device (only for the models
that support USB memory devices)
Description Item
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
• 0 Sec: This option allows you to continue printing
when the paper size you have set is mismatched with
the paper in the tray.
Auto Continue
• 30 Sec: If a paper mismatch occurs, an error message
will display. The machine waits for about 30 second,
then automatically clear the message and continue
printing.
• Off: If a paper mismatch occurs, the machine waits
until you insert the correct paper.
Altitude Optimize print quality according to the machine's
Adjustment altitude.
Allows you to append the required carriage return to
Auto CR
each line feed, which is useful for Unix or DOS users.
Firmware Version Shows the product's firmware version.
Description
221
3. Useful Setting Menus