Ipv6 Configuration; Uninstalling The Printer Driver Package; Setting Up The Printer - Samsung CLX-6220 Series User Manual

Installing the UNIX printer driver package
Installation procedure is common for all variants of UNIX OS mentioned
(See "UNIX" on page 3).
1.From the Samsung website, download and unpack the UNIX Printer
Driver package to your computer.
2.Acquire root privileges.
su -
3.Copy appropriate driver archive to the target UNIX computer.
See administration guide of your UNIX OS for details.
4.Unpack the UNIX printer driver package archive.
For example, on IBM AIX use the following commands.
cd /tmp
gzip –dc /cdrom/unix/packages/aix_power/aix_power.tar.gz | tar
–xvf –
The "binaries" folder consists of binz, install, share files and folders
5.Copy the "binaries" folder to any local folder.
6.Change to the driver's "binaries" directory.
cd aix_power/binaries
7.Run the install script.
./install
install is the installer script file which is used to install or uninstall the
UNIX Printer Driver package.
Use "chmod 755 install" command to give the permission to the
installer script.
8.Execute the ". /install –c" command to verify install results.
9.Run 'installprinter' from the command line. This will bring up the Add
Printer Wizard window. Setup the printer in this window referring the
procedure next.
On some UNIX OS, for example on Solaris 10 just added
printer may not be enabled and/or may not accept jobs. In this
case run the following two commands on the root terminal:
accept <printer_name>
enable <printer_name>

Uninstalling the printer driver package

The uninstalling printer utility should be used to delete the printer
installed in the system.
a)Run "uninstallprinter" command from the terminal.
It will open the Uninstall Printer Wizard
The installed printers are listed in the drop-down list
b)Select the printer to be deleted.
c)Click Delete to delete the printer from the system.
d)Execute the ". /install –d" command to uninstall the whole
package.
e)To verify uninstall results, execute the ". /install –c" command.
To reinstall it again, use the command ". /install" to reinstall the binaries.

Setting up the printer

To add the printer to your UNIX system, run 'installprinter' from the
command line. This will bring up the Add Printer Wizard window. Setup
the printer in this window according to the following steps:
1.Type the name of the printer.
2.Select appropriate printer model from model list.
3.Enter any decsription corresponding to the type of the printer in the
Type field. This is optional.
Downloaded from www.Manualslib.com manuals search engine
4.Specify any printer description in the Description field. This is
optional.
5.Specify printer location in the Location field.
6.Type the IP address or DNS name of the printer in the Device textbox
for network-connected printers. On IBM AIX with jetdirect Queue
type only DNS name is possible, numeric IP address is not allowed.
7.Queue type shows the connection as lpd or jetdirect in the
corresponding list box. Additionally usb type is available on Sun
Solaris OS.
8.Select Copies to set the number of copies.
9.Check the Collate option to receive copies already sorted.
10.Check the Reverse Order option to receive copies in the reverse
order.
11.Check the Make Default option to set this printer as default.
12.Click OK to add the printer.

IPv6 Configuration

TCP/IPv6 is supported properly only in Windows Vista or higher.
If the IPv6 network seems to not be working, set all the network setting
to the factory defaults and try again (See "Restoring factory default
settings using SyncThru™ Web Service" on page 3).
To use the IPv6 network environment, follow the next procedure to use the
IPv6 address:
1. Connect your machine to the network with a network cable.
2. Turn on the machine.
3. Print a Network Configuration Report from the machine's control
panel that will check IPv6 addresses.
a)Press Menu on the control panel.
b)Press the up/down arrow to highlight Network and press OK.
c)Press the up/down arrow to highlight Network Info. and press
OK.
4. Select Start > Control Panel > Hardware and Sound > Printers > Add
Printer.
5. Click Add a local printer on the Add Printer windows.
6. Follow the instruction on the window.
If the machine does not work in the network environment, activate
IPv6. Refer to the next section followed by.
Activating IPv6
1. Connect your machine to the network with a network cable.
2. Turned on the machine.
3. Press Menu on the control panel.
4. Press up/down arrow to highlight Network and press OK.
5. Press up/down arrow to highlight TCP/IP (IPv6) and press OK.
6. Press up/down arrow to highlight IPv6 Activate and press OK.
7. Press up/down arrow to highlight On and press OK.
On is set as a default.
8. Turn the machine off and turn it on again.
9. Print a Network Configuration Report from the machine's control
panel that will check IPv6 addresses.
1.Press Menu on the control panel.
2.Press up/down arrow to highlight Network and press OK.
3.Press up/down arrow to highlight Network Info. and press OK.
Network setup_ 6