Connecting To A Tv; Connecting The Camera Directly To The Printer — Pictbridge Function; Specifying Images For Printing On The Camera - FujiFilm FinePix F11 Owner's Manual

6.1 CAMERA CONNECTION

6.1.2 Connecting to a TV

1
2
1 0 2 0
3
Video (yellow)
To terminals
Audio (white)
4
Terminal
adapter
100
Plug the A/V cable (included) into the "A/V OUT"
(Audio/Visual output) socket of the terminal
adapter.
●
!
Do not connect USB cable (mini-B) to the camera.
1 Plug the AC power adapter connector into the
"DC IN 5V" socket of the terminal adapter.
2 Plug the AC power adapter into the power outlet.
Plug the other end of the cable into the audio/video
input socket on the TV.
●
!
When connecting the A/V cable (included) to TV, the LCD
monitor is turned off.
●
!
Refer to the instructions provided with your TV for more
information on audio/video input for your TV.
●
!
The image quality for movie playback is lower than for still
images.
Plug the terminal adapter into the terminal adapter
connection socket on the camera.
6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER
— PictBridge FUNCTION
When a printer that supports PictBridge is available, images can be printed
by connecting the camera directly to the PictBridge-compatible printer
without a PC.
●
!
In PictBridge function, images photographed on other than a camera may not be printed.

6.2.1 Specifying images for printing on the camera

1
1 0 0 3
2 0
PICTBRIDGE PICTBRIDGE
SET SET
1
SET SET
2
ENGLISH ENGLISH
SET SET
3
4
NTSC NTSC
2
3
0 1 2 0
4
Terminal
adapter
1 Press the " w
" button for about 1 second to turn
the camera on in Playback mode.
2 Select " ® ò
" PICTBRIDGE in " " USB MODE
˜
in the " " SET-UP menu (➡P.86).
3 Press the "POWER" button to turn the camera
off.
●
!
ò
Do not connect to a PC when the " " USB MODE setting is
set to " ® " PICTBRIDGE. See P.119 if you connect to a PC
by mistake.
1 Plug the USB cable (mini-B) into the USB socket
of the terminal adapter.
2 Connect the terminal adapter to your printer
using the USB cable (mini-B).
1 Plug the AC power adapter connector into the
"DC IN 5V" socket of the terminal adapter.
2 Plug the AC power adapter into the power outlet.
1 Plug the terminal adapter into the terminal
adapter connection socket on the camera.
2 Turn the printer on.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Use an xD-Picture Card that was formatted on FinePix F11.
Continued
6
101