FujiFilm FinePix F11 Owner's Manual page 54

6.3 CONNECTING TO A PC
4
USB socket
5
Terminal
adapter
Camera operation
◆
When displaying [COMMUNICATION ERROR]
CHECKING USB CHECKING USB
PICTBRIDGE PICTBRIDGE
106
1 Turn your PC on.
2 Connect the terminal adapter to your PC using
the USB cable (mini-B).
●
!
Make sure that the USB cable (included) is connected
correctly and pushed in.
Plug the terminal adapter into the terminal adapter
connection socket on the camera.
w
Press the " " button for about 1 second to turn the
camera on in Playback mode.
h When the camera and PC are exchanging data,
the indicator lamp blinks orange and self-timer
lamp blinks red.
¶
h " DSC" appears on the LCD monitor.
h Auto power off is disabled during USB
connection.
●
!
Before replacing the xD-Picture Card, always disconnect the
camera from the PC. See P.108 for information on the
disconnection procedure.
●
!
Do not disconnect the USB cable (mini-B) when the camera
is communicating with a PC. See P.108 for information on the
disconnection procedure.
◆
If "CHECKING USB" appears and then
[COMMUNICATION ERROR] is displayed on the
¶
LCD monitor, " " (DSC mode) is not selected in
" ò "USB MODE. Unplug the terminal adapter and
2
restart the procedure from step .
6
Set a PC
Windows 98 / 98 SE / Me / 2000 Professional / Macintosh
●
!
The Windows CD-ROM may also be required during installation. In this event, change CD-ROMs as directed by the
on-screen instructions.
h FinePixViewer automatically starts up and the
Save Image Wizard window (Save Image
dialog box) appears. Follow the instructions
provided on screen to save the images. To
proceed without saving the images, click the
[Cancel] button.
✽ Screen for Windows 2000 Professional
h A removable disk icon appears and you can use
your PC to transfer files to and from the camera.
If the above operations do not occur, you do not have the required software programs or drivers installed
on your PC. Complete the required PC setup procedures. Then reconnect the camera to your PC.
Windows XP
1 The "Found New Hardware" help message
appears in the bottom-right corner of your screen.
This message will close when the settings are
completed. No action is required.
●
!
This step is not required for subsequent connections.
2 A new removable disk icon appears in the "My Computer" window.
FinePixViewer automatically starts up and the Save Image Wizard window (Save Image
dialog box) appears. Follow the instructions provided on screen to save the images. To
proceed without saving the images, click the [Cancel] button.
◆ ◆
Regarding the icons
The next time you connect the camera, the removable disk drive icon's name changes to the
"FinePix" icon and name.
Proceed to "USING FinePixViewer" on P.109.
Windows Macintosh
6
107