Pictbridge Function - FujiFilm FinePix F11 Owner's Manual

6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER

— PictBridge FUNCTION

5
CHECKING USB CHECKING USB
PICTBRIDGE PICTBRIDGE
6
1 0 0 2
P P ICT CTBRI RIDGE GE
PR PRINT NT WITH TH DATE DATE
PR PRINT NT WITHOUT OUT DATE DATE
PR PRINT NT DPOF DPOF OK OK
7
PRINTING PRINTING
1/19 SHEETS
SHEETS
CANCEL CANCEL
102
w
Press the " " button for about 1 second to turn the
camera on in Playback mode.
"CHECKING USB" appears and then the menu is
displayed on the LCD monitor.
●
!
ò
If the menu does not appear, check whether the "
" ® " .
MODE setting is PICTBRIDGE
●
!
Depending on the printer, some functions are disabled.
1 Press "a" or "b" to select " u PRINT DPOF".
2 Press "c".
●
!
u
When [ NOT SET DPOF] appears, the DPOF settings are
not specified.
●
!
To use DPOF printing, the DPOF settings must be specified
on FinePix F11 beforehand (➡P.67, 69).
●
!
Even when "WITH DATE" is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.
" u PRINT DPOF OK?" appears on the LCD
monitor.
Press the "MENU/OK" button to download the data
to the printer and print the frames specified in the
DPOF settings.
●
!
Press the "DISP/BACK" button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
6.2.2 Specifying images for printing without using DPOF ( single-frame printing )
1
0 1
" USB
2 0
1
2
3
4
2
3
1 0
4
5
CHECKING USB CHECKING USB
PICTBRIDGE PICTBRIDGE
1 Press the " w " button for about 1 second to turn
3 0
the camera on in Playback mode.
2 Select " ® " PICTBRIDGE in "
˜
in the " " SET-UP menu (➡P.86).
3 Press the "POWER" button to turn the camera
off.
PICTBRIDGE PICTBRIDGE
SET SET
SET SET
ENGLISH ENGLISH
SET SET
●
!
Do not connect to a PC when the "
NTSC NTSC
®
set to " " PICTBRIDGE. See P.119 if you connect to a PC
by mistake.
1 Plug the USB cable (mini-B) into the USB socket
of the terminal adapter.
2 Connect the terminal adapter to your printer
using the USB cable (mini-B).
1 Plug the AC power adapter connector into the
2 0
"DC IN 5V" socket of the terminal adapter.
2 Plug the AC power adapter into the power outlet.
1 Plug the terminal adapter into the terminal
adapter connection socket on the camera.
Terminal
2 Turn the printer on.
adapter
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Use an xD-Picture Card that was formatted on FinePix F11.
Press the "w" button for about 1 second to turn the
camera on in Playback mode.
"CHECKING USB" appears and then the menu is
displayed on the LCD monitor.
●
!
If the menu does not appear, check whether the "
" ®
MODE setting is
●
!
Depending on the printer, some functions are disabled.
ò " USB MODE
ò
" USB MODE setting is
6
ò
" USB
" .
PICTBRIDGE
Continued 103