Switching The Screen Image (Fn+F2); Decreasing Screen Brightness (Fn+F3); Increasing Screen Brightness (Fn+F4); Initiating Quicklock (Fn+F6) - HP Mini User Manual

CAUTION:
The computer must be on before you can initiate Standby.
NOTE:
Hibernation and the information stored in memory is saved to the hard drive. The factory setting for
critical battery action is Hibernate, but this setting can be changed in advanced power settings.
To exit Standby, briefly slide the power switch.
The function of the
Hibernation instead of Standby.
NOTE:
hotkey.

Switching the screen image (fn+f2)

Press fn+f2
if a monitor is connected to the computer, pressing
display to monitor display to simultaneous display on both the computer and the monitor.
Most external monitors receive video information from the computer using the external VGA video
standard. The
from the computer.
The following video transmission types, with examples of devices that use them, are supported by the
fn+f2 hotkey:
LCD (computer display)
External VGA (most external monitors)

Decreasing screen brightness (fn+f3)

Press fn+f3
incrementally.

Increasing screen brightness (fn+f4)

Press fn+f4
incrementally.

Initiating QuickLock (fn+f6)

Press fn+f6
QuickLock protects your information by displaying the operating system Log On window. While the Log
On window is displayed, the computer cannot be accessed until a Windows user password or a Windows
administrator password is entered.
NOTE:
administrator password. For instructions, refer to Help and Support.
To use QuickLock, press
instructions on the screen to enter your Windows user password or your Windows administrator
password and access the computer.
52 Chapter 8 Pointing devices and keyboard
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
To reduce the risk of information loss, save your work before initiating Standby.
If a critical battery level occurs while the computer is in Standby, the computer initiates
fn+f1 hotkey can be changed. For example, you can set the
In all Windows operating system windows, references to the sleep button apply to the
to switch the screen image among display devices connected to the system. For example,
fn+f2 hotkey can also alternate images among other devices receiving video information
to decrease screen brightness. Hold down the hotkey to decrease the brightness level
to increase screen brightness. Hold down the hotkey to increase the brightness level
to initiate the QuickLock security feature.
Before you can use QuickLock, you must set a Windows user password or a Windows
fn+f6 to display the Log On window and lock the computer. Then follow the
fn+f2 alternates the screen image from computer
fn+f1 hotkey to initiate
fn+f1