Using Multiboot; About The Boot Device Order; Choosing Multiboot Preferences; Setting A New Boot Order In Computer Setup - HP ProBook 640 G1 Maintenance And Service Manual
This document is intended for hp authorized service providers only.
Hide thumbs
Also See for ProBook 640 G1:
- Overview (61 pages) ,
- Maintenance and service manual (170 pages)
Table of Contents
Advertisement
Using MultiBoot
About the boot device order
As the computer starts, the system attempts to boot from enabled devices. The MultiBoot utility, which is
enabled at the factory, controls the order in which the system selects a boot device. Boot devices can include
optical drives, diskette drives, a network interface card (NIC), hard drives, and USB devices. Boot devices
contain bootable media or files that the computer needs to start and operate properly.
NOTE:
Some boot devices must be enabled in Computer Setup before they can be included in the boot
order.
You can change the order in which the computer searches for a boot device by changing the boot order in
Computer Setup. You can also press
at the bottom of the screen, and then press f9. Pressing
devices and allows you to select a boot device. Or, you can use MultiBoot Express to set the computer to
prompt you for a boot location each time the computer turns on or restarts.
Choosing MultiBoot preferences
You can use MultiBoot in the following ways:
●
To set a new boot order that the computer uses each time it is turned on, by changing the boot order in
Computer Setup.
●
To dynamically choose the boot device, by pressing
message is displayed at the bottom of the screen, and then pressing
menu.
●
To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device each
time the computer is turned on or restarted.
Setting a new boot order in Computer Setup
To start Computer Setup and set a boot device order that the computer uses each time it is turned on or
restarted, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2.
press
3.
Use a pointing device or the arrow keys to select Advanced > Boot Options > UEFI Boot Order for UEFI
Hybrid or UEFI Native Boot Mode or select Advanced > Boot Options > Legacy Boot Order for Legacy
Boot Mode, and then press enter.
4.
To move the device up in the boot order, use a pointing device to click the up arrow, or press the
– or –
To move the device down in the boot order, use a pointing device to click the down arrow, or press the
key.
5.
To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the
screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
124 Chapter 7 Computer Setup
f10
to enter Computer Setup.
esc
while the "press the ESC key for Startup Menu" message is displayed
f9
displays a menu that shows the current boot
esc
while the "press the ESC key for Startup Menu"
esc
while the "press the ESC key for Startup Menu"
f9
to enter the Boot Device Options
+
key.
-
Advertisement
Table of Contents
