Front speakers
Description
Front speakers (include speaker cables)
Before removing the front speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Top cover (see
Remove the front speakers:
1.
Turn the top cover upside down, with the front toward you.
2.
Release the front speaker cables (1) from the clips and routing channel built into the top cover.
3.
Remove the two Phillips PM2.5×4.0 screws (2) that secure the front speakers to the top cover.
4.
Remove the front speakers (3).
64
Chapter 4 Removal and replacement procedures
Battery on page
45), and then remove the following components:
Hard drive on page
46)
Optical drive on page
Keyboard on page
57)
Top cover on page
61)
51)
Spare part number
681995-001